PRODUCT INTRODUCTION
This is a military grade mesh wireless broadband self-organizing network device developed by Northwestern Polytechnical University. It can provide highly reliable, low latency, and large bandwidth ultra long distance audio and video, control data transmission links, and can be carried by aircraft, vehicles, and individual soldiers. It provides high-speed and reliable communication solutions for industries such as unmanned aerial vehicle combat, naval fleet command, emergency rescue, and fire rescue.
PRODUCT FEATURE
Remote Transmission
Decentralized Self-organizing Network
Anti-Interference
High Speed Ommunication
Video Transmission
Voice Transmission
Intelligent Options
MIMO Function
Fast Access
Encrypted Ttransmission
Rich Interfaces
Secondary Development
High Communication Security
DES and AES128/256 encryption algorithms are optional, with high security communication encryption capabilities.
Frequency Band can be Customized
Customizable communication frequency range of 350-6000MHz to meet your diverse needs.
Rich Interface
Supports multiple network ports, 232, 422, 485 and other communication methods, providing rich interface capabilities.
Military Quality
Super high and low temperature tolerance, can work normally from minus 30 ℃ to 70 ℃. IP66 waterproof and dustproof, customizable IP67/IP68.
Designer and manufacturer of mobile robots, shipped to over 50 countries worldwide
NO CENTRAL SAME FREQUENCY SELF-ORGANIZING NETWORK
Supports self-organizing networks with 64 or more nodes and multi hop relay functions, providing highly reliable cluster formation system networking capabilities.
ANTI-INTERFERENCE
Support anti-interference functions such as intelligent frequency selection/autonomous frequency hopping/roaming mode, providing high stability communication connection capability.
MIMO MODE
MIMO (Multiple Input Multiple Output) technology utilizes multiple antennas to simultaneously transmit and receive multiple data streams. Through spatial diversity and spatial multiplexing techniques, multiple data streams are transmitted to different antennas. It can improve the utilization efficiency and data transmission rate of wireless channels, the anti-interference ability and bit error rate performance of signals, as well as the data transmission rate and reliability of wireless communication systems.
PRODUCT FUNCTION
TECHNICAL PARANMETER
Specifications | Airborne Communication Module | Portable Communication Module | Vehicle Communication Module | |
Overall performance | Number of network nodes |
Network Number of nodes ≥64 communication nodes are supported | ||
Null – null point-to-point communication rate |
Point-to-point communication rate ≥4Mbps@50km | – | – | |
Ground-air point-to-point communication rate | Point-to-point communication rate ≥4Mbps@100km | |||
Network communication rate | whole network communication rate ≥10Mbps@100km | |||
Networking capability | Networking mode | Wireless AD hoc network, supports point-to-point/point-to-many/many-to-many transmission, with adaptive multi-hop relay function | ||
Single-hop transmission delay | Single-hop transmission delay :≤30ms | |||
Network setup time | startup time :≤30s, network access time:<1s | |||
Transmission information encryption | DES, AES128/256 and other encryption modes | |||
Communication capability | Communication frequency band | 400MHz to 6GHz can be configured, dual frequency is optional | ||
Maximum communication rate | Maximum communication rate :≥90Mbps | |||
MIMO function | 2 receive 2 transmit, with receive/transmit beamforming receive diversity, space division multiplexing and other functions | |||
anti-interference | The system can communicate normally when the interference bandwidth is greater than 30% and the communication bandwidth dry-signal ratio is greater than 20dB | |||
anti-blocking | Frequency hopping, enhanced intelligent frequency selection optional | |||
Working channel bandwidth | The value can be set to 2.5/10/20 MHz | |||
Receiving sensitivity | -103 dBm @ 5MHz BW | |||
Electrical index | Input voltage | 18-36VDC | 18-36VDC | 220V AC |
Module power consumption | ≤100W | ≤100W | ≤500W | |
Rf output power |
≥10Wx2(no less than 10W per antenna) |
≥10Wx2(no less than 10W per antenna) |
≥20Wx2(no less than 20W per antenna) | |
battery | – | 10-12/6-8 hours 427/214Wh polymer lithium battery | – | |
Power supply selection | Main cable supply |
Power is supplied by the buckle battery or main cable | Main cable supply | |
port | RF | 2xTNC | ||
Basic interface | RF 2xTNC,RJ45 Ethernet 100/1000BaseT,WiFi AP, RS232/485/422,Sbus/USB/ Bluetooth,DC input | |||
Network extension option | Public network routing /4G LTE private network, broadband and narrow fusion, optical fiber, satellite | |||
Video expansion option | Low latency HDMI/SDI/CVBS, 4K/2K/1080P/720P/D1 | |||
Management interface /control interface | Web-based network management /GUI, providing API secondary development interface /SNMP | |||
Machine size | Operating temperature | -30℃ ~+ 70℃ | ||
Class of protection |
IP66, IP67/IP68 customized | |||
dimension | 135mmx120mmx34mm（±1mm） | 315mmx190mmx62mm（±1mm） | 482.6mmx482.6mmx88.9mm（±1mm） | |
weight | ≤900g | ≤4kg | ≤6kg | |
colour | Black, iron gray, army green options | |||
